The pressure V Belt has been installed air compressor

or Register to post new content in the forum

 

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Jan 12, 2017 9:44 pm

a[rel~="nofollow"] { outline: thin dashed firebrick ! important; background-color: rgb(255, 200, 200) ! important; }

5, the pressure V Belt has been installed air compressor change

Sometimes due to changes in the production process conditions, the original purchase of the air compressor design pressure may be too high or too low, hoping to change, but for the gear drive air compressor, the work will be very difficult and expensive, For the V Belt China-driven air compressor is concerned, it is easy to do, just replace the pulley can be.6, the installation of new bearings

When the rotor bearings need to be replaced, the gears for the air compressor, gear box and gearbox spindle bearings to be overhauled at the same time, the cost is difficult for users to accept. For V Belt China air compressor, there is no such problem.

7, replace the shaft seal

Any screw air compressor are used in a ring seal, to a certain life are required to be replaced. For gear-driven air compressor, you must first separate the motor, coupling, in order to close the shaft seal, making this work time-consuming and laborious, thereby increasing maintenance costs. For V Belt China-driven air compressors, simply remove the pulley can be, much easier.

8, the motor or rotor bearing damage

For the gear transmission air compressor, when the motor or rotor bearing damage, often will bring disaster to the important components of direct and indirect damage caused by double. For the V Belt China air compressor does not exist this situation.

9, structural noise

For a geared compressor, because the motor is rigidly connected to the rotor, the vibration of the compression PK Belt chamber rotor is transmitted to the gearbox and the motor bearing, which not only increases the wear of the motor bearings but also increases the machine noise.